ESB Tanning Bed Repair in Florida
Need ESB tanning bed repair in Florida? We find the actual cause, explain it in plain terms, give you a price before we start and back the finished repair with a 90-day parts-and-labor warranty.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
Repairing ESB Tanning Beds
ESB tanning beds use model-specific control boards, sensors and wiring layouts, so we start by reading the model and serial number from the rating label. That tells the technician which parts fit and whether any service bulletins apply to your unit.
How we repair your ESB Tanning Bed
A tanning bed is a clamshell or stand-up unit that exposes the skin to ultraviolet light from rows of lamps, cooled by internal fans and controlled by a timer. A tanning bed usually depends on a motor or lamps, timers or controls, safety switches and a power supply. A technician tests power and controls, motors or lamps, and safety devices.
ESB Tanning Bed repair at a glance
- Typical repair cost$100–$450
- Typical service life8–15 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common ESB Tanning Bed problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Lamps will not light
- Likely causes
- A failed ballast, worn starters, a faulty timer or a tripped breaker.
- What our technician checks
- The technician tests the ballast output, starters and timer and checks the dedicated circuit.
Cracked or cloudy acrylic
- Likely causes
- Cleaning with the wrong chemicals, age, or heat stress.
- What our technician checks
- The acrylic is inspected for cracks and replaced if damaged.
Bed overheating
- Likely causes
- A failed cooling fan, a clogged intake filter, or the bed placed in a small room with no ventilation.
- What our technician checks
- Fan operation, filters and room ventilation are checked.
Some lamps out or flickering
- Likely causes
- Lamps at the end of their life, failed starters, or loose lamp sockets.
- What our technician checks
- Lamps, starters and sockets are swapped and tested to find the fault.
Timer does not start or shut off
- Likely causes
- A failed timer, a faulty relay or a wiring problem.
- What our technician checks
- The timer and relay are tested for proper operation.
Weak tan results
- Likely causes
- Lamps used past their rated hours, dirty acrylic shield, or a failing ballast.
- What our technician checks
- Lamp hours and UV output are checked and the acrylic is inspected.
Quick checks you can do safely
- Check the breaker on the dedicated circuit.
- Clean the acrylic with the cleaner the manual recommends.
- Make sure the cooling fan intakes are clear.
- Note how many hours the lamps have been used.
- Leave space around the bed for ventilation.
Safety first: UV exposure can burn skin and eyes, so always wear approved eyewear and do not exceed recommended session times.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step tanning bed repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the tanning bed to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
ESB Tanning Bed repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- UV lamps
- Ballast
- Starters
- Timer
- Cooling fan
- Acrylic shield
- Lamp sockets
We match every part to your model and serial number.
Keep your ESB Tanning Bed running longer
- Keep the cooling fans and filters clean.
- Replace lamps as a full set at their rated hours.
- Check lamp sockets for heat damage during lamp changes.
- Clean the acrylic after each use with an approved cleaner.
- Run the bed only on its dedicated circuit.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorESB Tanning Bed repair in Florida
Long, humid summers in Florida push refrigerators, ice makers and AC units in Florida hard for most of the year.
We provide tanning bed repair in cities and towns across Florida, from large metro areas to smaller communities.
Also serving nearby
Choose your city on the Florida page for local details.
Tanning Bed brands we repair
Frequently Asked Questions
How much does ESB tanning bed repair cost in Florida?
Most ESB tanning bed repairs fall roughly between $100 and $450, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my ESB tanning bed the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including ESB, SunQuest and Wolff.
Should I repair or replace my ESB tanning bed?
A typical ESB tanning bed lasts about 8 to 15 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other specialty equipment repairs
More repair services
- Refrigerator Repair
- Washing Machine Repair
- Dryer Repair
- Dishwasher Repair
- Oven Repair
- Range Repair
- Microwave Repair
- Ice Maker Repair
- Camp Chef Outdoor Smoker Repair
- Chamberlain Garage Door Opener Repair
- Whirlpool Oven Repair
- iSpring Reverse Osmosis System Repair
- VEVOR Hot Plate Repair
- Navien Instant/on-Demand Water Heater Repair
Get your tanning bed fixed in Florida
Upfront quote before work starts · Parts matched to your model · 90-day warranty